HBPO worldwide

HBPO Lippstadt

HBPO GmbH
Rixbecker Straße 111
59557 Lippstadt
Germany
info@hbpogroup.com
+49 2941 2838-0

HQ

The HBPO Headquarters are located in Lippstadt in Westphalia. The company is managed from here. Central departments such as Research & Development and Program Management are based here. Around 240 employees work in Lippstadt.

HBPO Rastatt GmbH

HBPO Rastatt
Mercedesstraße 1, Tor 7
Industriepark II, HPC 011 i
76432 Rastatt
Germany
rastatt@hbpogroup.com

HQ

Der Just-in-Sequence-Montage-Standort hat seinen Sitz im Industriestandort Rastatt und
damit direkt auf dem Firmengelände des zu beliefernden Automobilherstellers.
Beschäftigt sind hier knapp 170 Mitarbeiter.

HBPO Meerane

HBPO Germany GmbH
Dennheritzer Str. 3
08393 Meerane
Germany
meerane@hbpogroup.com

HQ

The first HBPO just-in-sequence assembly plant to be built was founded in 1992, is located on the Meerane Industrial Estate and therefore is very close to our customer in Dresden and Chemnitz. A total of 140 employees work here – most of them in production.

HBPO Ingolstadt

HBPO Ingolstadt GmbH
Interpark
Kopernikusstraße 2
85092 Kösching
Germany
ingolstadt@hbpogroup.com

HQ

HBPO Ingolstadt has been growing steadily since it was founded in 2011. For this reason, the just-in-sequence assembly plant moved from a trade distribution center in Ingolstadt to neighbouring Kösching. From here, we supply our customers with various front-end modules. Around 80 employees work here.

HBPO Regensburg

HBPO Regensburg GmbH
Kremserstraße 18
93055 Regensburg
Germany
regensburg@hbpogroup.com

HQ

The just-in-sequence assembly plant is located on the Regensburg industrial park and thus in the direct vicinity of the car manufacturer it supplies. Around 120 employees have been producing front-end modules for the local customer.

HBPO Vaihingen/Enz

HBPO Vaihingen/Enz GmbH
Otto-Hahn Straße 3
71665 Vaihingen an der Enz
Germany
vaihingen@hbpogroup.com

HQ

The latest HBPO just-in-sequence assembly plant to open in Germany is located exactly between its two customers Daimler (Sindelfingen) and Porsche (Zuffenhausen). It was opened in 2018. There are currently around 50 employees working in Vaihingen/Enz. The plant started series production for the customer in 2019.

HBPO Saarland

HBPO Saarland GmbH
In der Lach 1-4
66271 Kleinblittersdorf
Germany
saarland@hbpogroup.com

HQ

DE7 is currently being built, and once opened in December 2019 it will be the largest HBPO location to date with around 14,000 m² floor space. The first pre-series will leave the production line in March 2020.

HBPO Entwicklungsbüro Sindelfingen

Entwicklungsbüro Sindelfingen
Mercedesstraße 15-19
71063 Sindelfingen
Germany
sindelfingen@hbpogroup.com

HQ

The German development office was opened in April 2018 and is located on the Sindelfingen industrial estate. It is responsible for research and development as well as central project management for the customer, which has a plant in the direct vicinity.

HBPO Banbury

HBPO UK Limited
Wildmere Industrial Estate
Oxon OX16 3EY Banbury,
United Kingdom
banbury@hbpogroup.com

HQ

The English just-in-sequence assembly plant was opened in 2005 and is located in an industrial park in Banbury. Around 90 employees produce front-end modules for the BMW-Mini and Bentley Continental here for customer plants in Oxford and Crewe.

HBPO Lozorno

HBPO Slovakia s.r.o.
Logisticky areal Westpoint D2
Hala C, c.p. 1070
900 55 Lozorno
Slovakia
lozorno@hbpogroup.com

HQ

Our Slovakian just-in-sequence assembly location produces front-end modules for the very “small” models up through to SUVs. Since it was founde in 2001, HBPO has been based in an Lozorno industrial park and close to the car manufacturers it supplies.

HBPO Automotive Spain S.L. – Martorell

Pol. Ind. Can Estella
c/ Edison 38-40
08635 Sant Esteve Sesrovires
Barcelona
Spain
martorell@hbpogroup.com

HQ

Our Spanish just-in-sequence assembly plant is located near Barcelona. We supply the local vehicle manufacturer with front-end modules. Around 40 employees work at our plant in Martorell, which was founded in 2007.

HBPO Mnichovo Hradiště

HBPO Czech s.r.o.
Nákladní 275
295 01 Mnichovo Hradiště,
Czech Republic
mnichovo.hradiste@hbpogroup.com

HQ

The Czech HBPO location is a just-in-sequence assembly plant and also a development facility. Around 120 employees work at the plant in Mnichovo Hradiště industrial park, close to our customers for both product development and assembly.

HBPO Kecskemét

HBPO Hungary Kft.
Mercedes út 1 (Tor 4)
6000 Kecskemét
Hungary
kecskemet@hbpogroup.com

HQ

Der ungarische Just-in-Sequence-Montage-Standort hat seinen Sitz im Industriepark Kecskemét. Gefertigt werden Frontend-Module für unseren dortigen Kunden. Eröffnet wurde der Standort 2010. Aktuell sind hier 95 Mitarbeiter tätig.

HBPO Györ

HBPO Automotive Hungaria Kft.
Ives u. 6
9027 Györ
Hungary
gyoer@hbpogroup.com

HQ

At this Hungarian just-in-sequence assembly plant we produce front-end modules for a local customer. The location was founded in 2013. There are currently 100 employees working here.

HBPO Automotive Hungária Kft.

HBPO Automotive Hungária Kft.
Holland Fasor 6/a
8000 Székesfehérvár
Hungary
szekesfehervar@hbpogroup.com

HQ

The Hungarian just-in-sequence assembly plant is located in an industrial park in Székesfehérvár. 35 employees have been producing HBPO's Active Grille Shutter here since 2016 (the air flap controls). The Active Grille Shutters are built into our front-end modules at corresponding locations.

HBPO Windsor

HBPO Canada Inc.
2570 Central Ave.
Ontario N8W 4J5 Windsor,
Canada
windsor@hbpogroup.com

HQ

The Canadian just-in-sequence assembly plant is located in an industrial park in Windsor. Founded in 2007 the plant now has more than 150 employees. Front-end modules assembled in Windsor for the local customer.

HBPO Puebla

HBPO Mexico S.A. de C.V.
Parque Ind. Finsa Nave 15
KM 117 Autopista México-Puebla
Cuautlancingo, Puebla 72710 Mexico
Mexico
puebla@hbpogroup.com

HQ

The Mexican JIS assembly plant is located in a Puebla industrial park and is responsible for manufacturing front-end modules for the local customer. The plant was one of HBPO's first and was founded in 1997. 140 employees work here. In 2015, the complex was expanded to include Puebla Molding, where two injection moulding machines produce the front-end carriers for front-end module assembly in the neighbouring plant.

HBPO Toluca

HBPO Mexico S.A. de C.V.
Av. Independencia No. 1903
Col. Zona Ind. Toluca C.P
50030 Mexico
Mexico
toluca@hbpogroup.com

HQ

The Mexican just-in-sequence assembly plant is located in an industrial park in Toluca. It produces front-end modules for the local customer. Around 140 employees work at the Toluca location. It was opened in 2007.

HBPO Aguascalientes

HBPO México S.A. de C.V.
Carretera Panamericana Sur KM 114 + 354,
Interior 38
Colonia Parque Industrial Finsa Aguascalientes
20393 Aguascalientes
Mexico
aguascalientes@hbpogroup.com

HQ

The Mexican just-in-sequence assembly plant is located on Aguascalientes industrial estate and is responsible for producing front-end modules for the local customer. The location was opened in 2017. A total of 78 employees works here.

HBPO San José Chiapa

HBPO México S.A. de C.V.
Autopista AUDI KM 12
JIS 1-B Zona Industrial San José Chiapa
75010 San José Chiapa, Puebla
Mexico
sanjosechiapa@hbpogroup.com

HQ

The just-in-sequence assembly location has been based in the industrial town of San José Chiapa since 2013. There are currently 150 employees working here. The plant is responsible for the production of front-end modules and centre consoles for the local customer.

HBPO Saltillo

HBPO México S.A. de C.V.
Vialidad Existente #851
Col. Llanos de Agua Nueva (Santa Mónica)
Saltillo. Coah. CP25300
Mexico
saltillo@hbpogroup.com

HQ

The Mexican just-in-sequence assembly plant has been located in Saltillo industrial estate since 2017 and is responsible for producing front-end modules. More than 60 employees work at the Saltillo location.

HBPO North America Inc.

US Corporate Office
US Corporate Office 700 Tower Drive Suite 250
MI 48098 Troy,
USA
troy@hbpogroup.com
+1 248 823 7078

HQ

Our headquarters – the Corporate Office – in North America serves as HBPO's North American development and central project management location at the same time. HBPO is based in a Troy office complex and was opened in 2002 – currently about 40 employees work here.

HBPO Shanghai

HBPO China Ltd.
391 Guiping Road, Block A, 35/F
New Caohejing International Business Center
Xuhui Distric
200031 Shanghai
P.R. China
shanghai@hbpogroup.com

HQ

HBPO’s Development Centre is located in a Shanghai’s industrial park and is responsible for research & development in China.

HBPO Beijing

HBPO Beijing Ltd.
Supplier Park, NGCC plant, Beijing Benz Automotive
Co.,Ltd.
Ruihe Road,
Beijing Economic-technological Development Zone,
100176 Beijing
P.R. China
bejing@hbpogroup.com

HQ

This Chinese just-in-sequence assembly plant is located in an industrial park in Beijing. The front-end modules for a local customer are manufactured here. The location was founded in 2013. The first fem module came off the production line in 2015. 86 employees work at the Beijing plant.

HBPO Nanjing

HBPO Nanjing Ltd.
No.2 Warehouse
Nanjing Longtan Cross Border E-commerce Industry Park
No. 8 Jin Gang Road.
210000 Xi Xia District Nanjing
P.R. China
nanjing@hbpogroup.com

HQ

The just-in-sequence assembly plant is currently under construction in an industrial park in Nanjing. Production is to start at the end of 2019/beginning of 2020.

HICOM HBPO Shah Alam

Hicom HBPO
Level 4
Wisma DRB-Hicom, No.2
Jalan Usahawan, U 1/8
Seksyen U1
40150, Shah Alam
Malaysia

HQ

"HICOM is a joint venture between HBPO and the Malaysian automotive supplier DRB. The assembly plant is located in the Shah Alam industrial park and is responsible for shipping and production of individual parts and assemblies which are not assembled until they reach the import country of the automotive supplier it supplies.

HICOM HBPO Pekan

Hicom HBPO Pekan Plant
LoMA Office B-17
Hicom Automotive Manufacturing Malaysia (HAMM)
Complex
Peramu Jaya Industrial Estate
26607 Pekan
Pahang Darul Makmur
Malaysia

HQ

The Malaysian HICOM just-in-sequence assembly plant is located in Pekan. The plant is responsible for the production of front-end modules for the local customer. HICOM is a joint venture between HBPO and DRB.

HICOM HBPO Tanjung Malim

HBPO Tanjung Malim
Lot 23, Jalan Jelawai
Kawasan Perindustrian Proton
35900, Tanjung Malim
Perak
Malaysia

HQ

The Malaysian HICOM assembly plant is located in a Malim industrial park. HICOM, a joint venture between HBPO and DRB, is responsible for manufacturing front-end modules for the local customer.

HICOM HBPO Kulim

HBPO Kulim
No. 1075, Jalan Aman 4/2
Taman Industri Makmur
Sungai Seluang
09600, Lunas
Kedah Darulaman
Malaysia

HQ

One of HBPO’s Malaysian assembly centres is located on the Kulim industrial estate. The assembly centre is responsible for the production of individual front-end modules for the local customer.

HBPO Asia Ltd.

8F Ann Jay Tower
208 Teheran-ro, Gangnam-gu
Seoul 135-920
South Korea
seoul@hbpogroup.com
+82 2 6003 3000

HQ

HBPO’s South Korean development location and Corporate Office is based in an industrial park in Seoul and is responsible for research and development as well as central project management. The Asian headquarters were opened in 2014. There are currently 15 employees working here.

HBPO Pyeongtaek

HBPO Pyeongtaek Ltd.
154-36, Asan valley jungang-ro, Dunpo-myeon
31409 Asan-si, Chungcheongnam-do
South Korea
pyeongtaek@hbpogroup.com

HQ

This HBPO just-in-sequence assembly plant in South Korea has been based in a Pyeongtaek industrial park since 2013 and is responsible for manufacturing front-end modules for a customer located in Pusan. There are currently almost 30 employees working here.

SHB Jillyang

SHB Automotive Module Co. Ltd. Gyeongsan-si
Headquarters & Research center
1208-6 Singsan 1-ri
Jillyang-eup
Gyeongsan-si, Gyeongsangbuk-do
South Korea

HQ

SHB, a joint venture with South Korean automotive supplier Samlip, is based in Jillyang, South Korea.

SHB Hwaseong

SHB Automotive Module Co. Ltd. Hwaseong-si
1047-3 Ihwa-ri
Ujeong-eup, Hwaseong-si
Gyeonggi-do
South Korea

HQ

The SHB assembly location (joint venture between HBPO and Samlip) is based on the Hwaseong industrial estate and is responsible for manufacturing the individual front-end modules for a local customer.

SHB Seosan

SHB Automotive Module Co. Ltd. Seosan-si
1177 Suseok-dong, Seosan-si
Chungcheongnam-do
South Korea

HQ

The South Korean just-in-sequence assembly plant is located in a Seosan industrial park and is responsible for manufacturing front-end modules for the local customer. SHB is a joint venture between HBPO and Samlip.

SHB Ulsan

SHB Automotive Module Co. Ltd. Ulsan
620-1 Hyomun-dong, Buk-gu
Ulsan
South Korea

HQ

The South Korean just-in-sequence assembly plant is located in a Ulsan industrial park and is responsible for manufacturing the individual front-end modules for the local customer.